Alsajet

ALSAGLIDE COATING TECHNOLOGY

MULTIKNOT DESIGN

USER FRIENDLY DESIGN FOR EASY LOADING

ALSAglide Coating technology is a special surface coating procedure using a hydrophilic coating component Polypropylene. Effects as a lubricative and facillitates the stopless insertion of IOL through cartridge particularly

MultiKnot Design of Plunger Tip allows Cushuion move straight ahead in cartridge without stucking or breaking. Prevents swelling and unwanted form changes on Cushion that initially reduces risk of trapped IOL haptic and ensures extra safe IOL implantation procedures.

How to Use

  1. Hold cartridge and arrange ‘V’ position with leaving narrow angle in between its two wings. Position of wings shouldn’t be wide open entire procedure.
  2. Put small amount of ALSAVISC inside cartridge. Not recommended fully fill cartridge
  3. Fill OVD both cartridge loading bay and groove.Spread OVD within each other. Avoid over fill.
  4. Pull out IOL gently from holder
  5. Before placing IOL into cartridge Make sure that holes on haptic or form of haptic indicate “reverse-S” shape
  6. Place IOL carefully into cartridge loading bay. Ensure that all haptic part of IOL is located below the groove lines. Both optic and Haptic parts should be placed in tunnel.
  7. Use forceps to apply litte press on haptics to locate IOL in tunnel properly. Always check haptic parts before closing cartridge.Close cartridge by pushing wings until hear ‘click’ sound that indicates proper closing.
  8. Close cartridge by pushing wings until hear ‘click’ sound that indicates proper closing
  9. Insert cartridge to path on injector with slight angle. Apply some amount of OVD from cartridge hole if necessary.
  10. Push plunger slowly and check IOL position and check folding pattern from transparent cartridge lastly before insertion.

START TYPING AND PRESS ENTER TO SEARCH